Vender DC 12V 1 Channel Relay Remote Control RF Wireless 1 Transmitters 1 Receiver A al mejor precio

Description: This 12V single learning code remote control switch is suitable for anti-theft alarm, remote control of electric doors and windows, signal control, industrial control, lifting equipment and other electrical control circuits. Output relay switching: can control the load of different voltages below 250V. The power supply must be 12V. Small size, circuit board size is only 35 x 30 x 17mm. Working mode: The user can adjust at will: the self-locking, interlocking, jogging and delay working mode is adopted by short-circuiting the pin. Learning type code: You can learn the code with the same frequency remote control at will. (Don't worry if you lose the remote control during the process. Just buy a remote control and learn it. It is OK, no need to replace it, which greatly saves the user's cost.) Specification: Working voltage: DC12V Static working current: ≤10mA Standby current: < 6MA RF frequency: 433M RF mode of operation: superheterodyne reception Receive sensitivity: -110dbm Remote control distance: open space is more than 100 meters. Support remote control type: learning code, fixed code. Multiple working modes: jog, self-locking, interlocking. Wiring method: fixed wiring post Switching output: normally open, common, normally closed. Board size: 35x30x18mm (length, width, height) Package Includes: 1 x Remote Control Switch 1 x Remote Controller