Vender Single Phase Two Wire LCD Power Consumption Watt Energy Meter Din Rail Mount kWh AC5-32A 230V 50Hz 110V 60Hz HHHK al mejor precio

Package Included: 1*Energy meter DDS518L 1*English operation manual Specifications: model: DDS518L Accuracy: Level 1 Rated voltage: 110V/230V AC Rated current: 5 (32) A In the rated current column, the value before the brackets is the rated current value Ib, and the value in parentheses is the rated maximum current value Imax. Description: Displayed by 7+1 digit LCD or 6+1 digit meter It is used to measure single-phase AC active energy with rated frequency of 50Hz or 60Hz, for fixed installation indoors. 1. Installation precautions and methods 1.1 The electric energy meter is inspected and qualified before being shipped from the factory, and can be installed and used after sealing. The electric energy meter with no lead seal or storage time should be re-inspected before the relevant department can be installed and used. 1.2 When the electric energy meter is taken out from the original packing box, the inner packaging or the outer casing is damaged. Do not install or power the meter. Please contact our technical service department. 1.3 Installation of the energy meter requires an experienced electrician or professional, and be sure to read this manual. 1.4 The electric energy meter should be installed in a ventilated and dry place indoors. It should be installed by 35mm DIN standard rail. The bottom plate of the electric energy meter should be fixed on the wall with strong fire resistance and vibration resistance. 1.5 In places where there is contamination and possible damage to the facility, the energy meter should be installed in a protective cabinet. 1.6 When installing the wiring, it should be wired according to the wiring diagram on the electric energy meter case or the corresponding wiring diagram of the manual. It is best to use multi-strand copper wire to prevent the electric energy meter from working abnormally or burning due to poor contact. 1.7 When the energy meter is properly connected to the power grid, the power indicator of the meter is always on. 2 instructions for use 2.1 When the electric energy meter is used in areas with high lightning power, lightning protection measures should be taken to avoid damage to the electric energy meter due to lightning strikes. 2.2 The load capacity of the energy meter is 0.05Ib~Imax (direct access type) 2.4 data display: LCD or meter display 2.5 Power indication: When the green light is on, it indicates that the working power of the energy meter is normal. 2.6 pulse indication: when the red light is on, it indicates that the energy pulse is checked. 2.7 When there is a sampling signal, the pulse indicator lights up for about 80ms. 2.8 LCD and meter display types, as follows: total power consumption LCD display NNNNNNN.N (7+1 format) and meter display NNNNNN.N (6+1 format), for example: total power consumption value is liquid crystal display 0000000.0 KWh or meter display 000000.0KWh Note: This picture of 110V is replace in 230V because of the lost of original picture.