Vender V500 One-handed Gaming Keyboard RGB Illuminated Keyboard with Converter Gaming Accessory al mejor precio

Product parameters: Name: One-handed Gaming keyboard + converter Product model: V500 Product interface: USB 2.0 Press the number of keys: 35 keys Key life: 20 million times Product line length: 1.55m（Braided wire） Flash ROM: 32 bytes EEPROM: Built-in 2K bytes Operating voltage : VDD = 3.3V - 5.5V Working current: 100mA Ambient temperature: - 40°C - + 85°C Programming temperature: 0°C - + 85°C Lighting mode: RGB lighting, multiple lighting modes can be switched Support Win 2000 / win7 / win8 / win10 / Vista 32bit, Android. Product net weight: 357g Product size: 25.3*18*3.7cm Package Weight:431g Package Size:26.1*19*4cm Package Included: 1*gaming keyboard(35 keys) 1* English User manual The keyboard backlight function is controlled as follows: Fn+F3= 8 kinds of backlight mode switching (red light → blue light → green light→ purple light → light blue light → yellow light → white lights → rainbow light) Fn+F4= Wave/Colorful Horse Race: Colorful color gradient running water. The default wave mode. Press again to enter the colorful cycling horse mode. Fn+F5= Backlight off/on, cycle switch. FN+5 = Adjust the streamer speed to become faster FN+6 = Adjust the streamer speed to slow down Two USB interface functions: Connect the USB cable to the game console, press the logo, and connect the original handle with the mouse Connect to the corresponding USB interface: 1. The product converts the keyboard and mouse functions to the corresponding game platform for game operation 2. The product must be connected to the original wired controller for wired guidance (except for the SWITCH host) in order to normally convert the keyboard and mouse to the corresponding game platform 3. The default two sets of key values, the mouse corresponds to the game platform function 4. The direction of the mouse can be switched by pressing ESC+CAPSLOCK+A/S/D/F/G 5. The mouse movement speed can be adjusted, and the speed of the axises can beadjusted as a whole through the ESC+R buttons. 6. Support USB upgrade 7. Product working voltage: DC 5V LED corresponding mode: When the one-handed keyboard is not connected to peripherals, the right indicator light ② will be red(Check the digital number against the picture in the manual） When the original handle and mouse peripherals are inserted, the left indicator light ① shows green light(Check the digital number against the picture in the manual） 1.Set keyboard and mouse functions 2.Connect the keyboard to the game console, and insert the corresponding original wired controller into the designated interface of the device Press ESC+SPACE on the keyboard at the same time to enter the mode of setting the keyboard and mouse button functions by yourself (the setting indicator lights up at this time). Press and hold the function button of the original handle Click the button on the keyboard or mouse to be set Release the original wired handle button At this time, the function of the button held down by the original handle is set to the pressed keyboard or mouse button. (Original handle buttons function normally and will not be affected by this setting) After setting, press ESC+SPACE on the keyboard to save the current setting and exit the setting mode For examples: press ESC+SPACE (space bar) to enter the setting mode, press and hold the A key of the original SWITCH handle, press the F key on the keyboard, and release the A key of the original SWITCH handle. At this time, press the F key on the keyboard, and it will appear The function of the handle A key. 3.Cancel the function set by keyboard and mouse Note: When setting the left and right joystick function of the original wired handle to the keyboard, the direction of the joystick must be pushed to the end, and only the four directions of the joystick are set up, down, left and right For the setting of the mouse, when the original wired joystick must be pushed to the end, the mouse will slide in the corresponding direction and the mouse only supports the corresponding function of the left and right joystick directions. The original handle cross keys support 8 directions setting During the setting process, if you do not hold down the original wired handle function key or push the joystick to the end, the original set function of the keyboard or mouse will be cleared 4.Mouse speed adjustment，Product support mouse Movement speed adjustment, the default is the third gear. DPI speed adjustment: ESC+CAPSLOCK+A/S/D/F/G (can be adjusted cyclically). 5.Mouse Y axises direction switch The control of the Y-axises of some games is opposite to the setting value. The game operator can adjust the Y-axises direction of the mouse by pressing ECS+R according to their own needs. 6.Description of function switching Enter setting mode: ESC+SPACE Exit setting mode: ESC+SPACE Precautions： If the keyboard does not work properly, check if the computer's PS/2 or USB.connector is normal or the keyboard cable is broken. Avoid using the mouse and keyboard in an environment with strong sunlight, overheating or severe dust. Include: 1xGaming keyboard(35 keys) 1x English User manual