Vender Matek H743-WING MPU6000 Barometer OSD Blackbox 3-8S Flight Controller al mejor precio

Input voltage range: 9-36V (3-8S LiPo) w/TVS protection. Battery Voltage Sensor: 1:10 (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot). Current Senor: 132A, 3.3V ADC (Scale 250 in INAV, 40 A/V in ArduPilot) Sense resistor: 60A continuous, 132A burst. Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS ule, AirSpeed. Continuous current: 2 Amps, Max.3A. BEC 9V /12V output Designed for Video Transmitter, Camera, Gimbal ect. Continuous current: 2 Amps, Max.3A. 12V option with Jumper pad BEC Vx output .Designed for Servos. Voltage adjustable, 5V Default, 6V or 7.2V via jumper. Continuous current: 8 Amps, Max.10A. BEC 3.3V output. Linear Regulator. Continuous current: 200mA Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash IMU: MPU6000 (SPI1) & ICM20602 (SPI4) Baro: Infineon DPS310 (I2C2) OSD: AT7456E (SPI2) Blackbox: MicroSD card slot (SDIO) 7x Uarts (1,2,3,4,6,7,8) with built-in inversion. 13x PWM outputs(including "LED" pad) 2x I2C 1x CAN 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 1x SPI3 breakout USB/Beep Extender with Type-C(USB2.0) Dual Camera Inputs switch 5V/9V(12V) for Camera/VTX power switch High-precision Current Sense ADC VB2 voltage divider: 1K:10K ADC AirSpeed voltage divider: 10K:10K INAV TR/SA VTX control: Yes Beeper : Yes RSSI: Yes Analog Airspeed sensor: Yes Digital Airspeed sensor: Yes Static power 160mA@5V FC Firmware ArduPilot(ChiBiOS): MATEKH743 INAV: MATEKH743 (To be supported soon) BetaFlight: MATEKH743 size:3.05 x 3.05cm Material:Plastic + Metal colour:blue Package Contents: 1 x H743-WING<br />1 x USB/Beep Extender 1 x 20cm SH-4P to GH-4P cable for CAN port 1 x 20cm SH-6P to SH-6P cable for USB extender. 1 x Dupont 2.54 pins (Board is shipped unsoldered) Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.